East Glasgow · Bellshill · Lanarkshire

Cambelt, Wet Belt & Clutch Replacement in Glasgow

Fixed-price wet belts and planned timing belt, chain and clutch jobs, done at our workshop in Bellshill, just east of Glasgow. Send your reg and the job you need and we’ll come back to you with a quote.

Prefer to talk? Call 0141 673 0500

  • OEM parts and lubricants on every wet belt
  • Cambelts, timing chains, clutches and flywheels
  • Free, no-obligation quote from your reg

Get your free quote

Send your registration and the job you need. We’ll come back to you with a price and a date for the workshop.

Glasgow Cambelt & Clutch quote

Free, no-obligation quote. Or call 0141 673 0500. Your details go only to our partner garage in Bellshill.

Quick answerGlasgow Cambelt & Clutch handles cambelt (timing belt), wet belt, timing chain and clutch replacement for Glasgow, with the work done at a partner workshop in Bellshill covering east Glasgow and Lanarkshire. Wet belts are fixed price: Ford 1.0 EcoBoost £1,100, Ford Transit 2.0 EcoBlue £850 and Peugeot 1.2 PureTech £650, all with OEM parts. Send your registration for a quote before anything is booked.

What we do

The big jobs, done properly

This isn’t general servicing or breakdown work. It’s bigger, planned jobs: the kind that need the right parts, a proper workshop and a full day set aside.

Cambelt & timing belt replacement

A cambelt keeps the engine’s valves and pistons in time. It is replaced at the manufacturer’s interval, before it wears out.

  • Timing belt and tensioner kit
  • Water pump where it is driven by the belt
  • Petrol and diesel engines
Cambelt replacement in Glasgow

Wet belt replacement

Wet belts run inside the engine in oil. As they wear they can shed material into the oil and cause oil pressure problems. Fixed prices, OEM parts.

  • Ford 1.0 EcoBoost (Fiesta, Focus, EcoSport, Puma and more)
  • Ford Transit 2.0 EcoBlue
  • Peugeot 1.2 PureTech (also Citroën, DS, Vauxhall)
Wet belt replacement in Glasgow

Clutch & flywheel replacement

Slipping, juddering or a high biting point usually means the clutch is worn. Many cars also have a dual mass flywheel.

  • Clutch kit replacement
  • Dual mass flywheel replacement
  • Release bearing and slave cylinder
Clutch replacement in Glasgow

How it works

From enquiry to finished job in four steps

  1. Send your reg

    Fill in the short form with your registration and the job you need, or call 0141 673 0500.

  2. We check your engine

    Your registration tells us the engine, so the right belt, kit or clutch is quoted.

  3. You get a quote

    You get a price and a date for the job, and any questions answered.

  4. Drop it at the workshop

    Bring the car to the Bellshill workshop on the agreed day and collect it once the job is done.

Belt, wet belt or chain?

Which timing system does your car have?

It depends on the exact engine, not just the model. The same car can have a belt, a wet belt or a chain depending on the engine fitted. Send your registration and we will confirm.

TypeWhere it runsWhen it is replacedWarning signs
Cambelt (dry timing belt)Outside the engine, behind a coverAt the manufacturer’s age or mileage interval, whichever comes firstOften none before it fails, which is why it is changed on schedule
Wet belt (belt-in-oil)Inside the engine, in contact with the engine oilAt the manufacturer’s interval, or sooner if it shows wear or oil contaminationOil pressure warning, engine warning light, belt debris in the oil, rattle
Timing chainInside the engine, lubricated by oilOn condition, usually when it has stretched or become noisyRattle on start-up, timing-related fault codes

Cambelts, wet belts, timing chains and clutches are all covered. Timing chain replacement in Glasgow.

Wet belt engines

Driving a Ford EcoBoost, a Transit EcoBlue or a PureTech?

Several popular engines use a wet belt: a timing belt that runs inside the engine in the oil. When these belts wear, pieces of belt can end up in the oil and block the oil pick-up, which can lead to low oil pressure and serious engine damage.

Every wet belt job here uses OEM parts and OEM-specification lubricants, at a fixed price agreed before the car comes in. Water pump replacement is available as an option.

Wet belt replacement in Glasgow
  • Ford 1.0 EcoBoost: Fiesta, Focus, EcoSport, B-Max, C-Max, Puma, Transit Connect and Courier
  • Ford 2.0 EcoBlue: Transit and Transit Custom vans
  • 1.2 PureTech: Peugeot 208, 2008, 308, 3008, 5008; Citroën C3, C4, C5 Aircross; DS; Vauxhall Corsa, Mokka, Crossland, Grandland, Astra
  • Not sure? Send your reg and we’ll confirm the engine

Areas we cover

Workshop in Bellshill, east of Glasgow

The workshop is in Bellshill, so it’s handy for the east side of Glasgow and the Lanarkshire towns around it. If you can drop your car in Bellshill, we can do the job.

See all areas

Closest to the workshop

  • Shettleston
  • Parkhead
  • Baillieston
  • Easterhouse
  • Tollcross
  • Bellshill
  • Uddingston
  • Viewpark

Also covered

  • Motherwell
  • Hamilton
  • Coatbridge
  • Airdrie
  • Wishaw
  • Cambuslang
  • Rutherglen
  • East Kilbride
  • Glasgow city centre

FAQ

Frequently asked questions

What work do you cover?

Cambelt and timing belt replacement, wet belt (belt-in-oil) replacement including Ford 1.0 EcoBoost, Ford 2.0 EcoBlue and Peugeot 1.2 PureTech engines, timing chain replacement including Renault and Nissan 1.2 engines, and clutch and flywheel replacement. These are planned, bigger jobs, not general servicing, diagnostics or breakdown callouts.

Where is the work done?

At our workshop in Bellshill, just east of Glasgow in North Lanarkshire. Once you have your quote and a date is agreed, you drop the car off at the workshop and collect it when the job is done.

Which areas do you cover?

Most customers come from the east side of Glasgow (Shettleston, Parkhead, Baillieston, Easterhouse and nearby) and from Lanarkshire towns such as Bellshill, Uddingston, Motherwell, Hamilton and Coatbridge. Anyone in and around Glasgow who can drop their car at the Bellshill workshop is welcome.

How much does a wet belt replacement cost?

Fixed prices: Ford 1.0 EcoBoost £1,100, Ford Transit 2.0 EcoBlue £850 and Peugeot 1.2 PureTech £650. Each price includes a new wet belt kit and an oil and filter change; see the individual engine pages for everything included. Water pump replacement is optional and quoted separately.

What parts do you use?

OEM (original equipment) parts and OEM-specification lubricants on every wet belt job. No corners are cut on parts or oil.

How do I get a quote?

Fill in the quote form with your registration, postcode and the job you need, or call 0141 673 0500. Your enquiry goes to our partner garage, who will contact you with a quote.

Who carries out the work?

This website is an enquiry service. Your enquiry is passed to our partner garage in Bellshill, who provides the quote and carries out the work at their workshop.

Do you do breakdowns or emergency callouts?

No. The focus is planned jobs (cambelts, wet belts, timing chains and clutches) booked in on a date that suits you. For a breakdown, contact your breakdown provider.

Why do you need my registration?

The registration identifies the exact engine fitted to your car. That tells us whether it has a cambelt, a wet belt or a chain, and which parts are needed, so the quote is accurate.

Is the quote free?

Yes. Asking for a quote is free and there is no obligation to go ahead.

Free quote

Tell us the car and the job

Your registration is enough to start. We check what your engine needs and come back to you with a quote and a workshop date before anything is booked.

  • Fixed-price wet belts with OEM parts and lubricants
  • Quote first, then a date that suits you
  • Workshop in Bellshill, covering east Glasgow and Lanarkshire

Request your quote

Send your registration and the job you need. We’ll come back to you with a price and a date for the workshop.

Glasgow Cambelt & Clutch quote

Free, no-obligation quote. Or call 0141 673 0500. Your details go only to our partner garage in Bellshill.